Surface & heat treatment

Commissioned work to change surface finish, protection or material properties by surface or thermal treatment. Geometry-producing precision grinding belongs with machining.

Services from suppliers

459 services

Service
Robotic grit blasting
Price on request
Automated blasting for components within the stated robotic envelope.
By JAI Overfladebehandling A/S
Sverigesvej 3, 7480 Vildbjerg, Denmark
Service
Rubber coating and vulcanization
Price on request
Rubber bonding and spray-rubber/polyurea work on steel. Offered through the PlusCoat network.
By PlusCoat DK A/S
Værkmestervej 7, 5600 Faaborg, Denmark
Service
Sandblasting and metallizing
Price on request
Prepare and protect large gear surfaces.
By Niebuhr Gears A/S
La Cours Vej 8, 7430 Ikast, Denmark
Service
Sandstrom dry-film coating
Price on request
Dry-film lubricating coatings for demanding friction conditions.
By HAI Horsens A/S
Sverigesvej 9, Horsens, 8700, Denmark
Service
Satin chromium plating
Price on request
Trivalent satin chromium with a matte appearance; request a reference sample before production.
By Midtjydsk Fornikling & Forchromning A/S
Hvidelvej 7, 7400 Herning, Denmark
Service
Satin nickel plating
Price on request
Semi-bright or semi-matt nickel finishes for decorative parts; the substrate finish influences the result.
By Chem-Tec Plating A/S
Kærvejen 13, 7171 Uldum, Denmark
Service
Selective masking
Price on request
Mask selected surfaces or holes during anodising.
By Dansk Anodiserings Industri A/S
Pantervej 20, 7700 Thisted, Denmark
Service
Selective masking
Price on request
Protect selected holes and surfaces during anodising or conversion coating.
By HAI Horsens A/S
Sverigesvej 9, Horsens, 8700, Denmark
Service
Selective reel-to-reel plating
Price on request
Plating of smooth or stamped metal strip, including one-sided, edge-depth and longitudinal stripe treatment for contacts, connector pins, springs and antennas.
By Chem-Tec Plating A/S
Kærvejen 13, 7171 Uldum, Denmark
Service
Sheet and profile deburring
Price on request
COSTA belt/brush processing for edges, radii and surfaces; passage width 1390 mm and height 150 mm. Geometry and finish requirements remain job-specific.
By Toftlund Maskinfabrik A/S
Gøttrupvej 15–19, 6520 Toftlund, Denmark
Service
Sheet deburring and belt finishing
Price on request
Deburr cut sheet and apply directional belt finishes, including foil-covered stainless surfaces.
Service area
Denmark, Germany and the Nordic countries
By Brimas A/S
Satellitvej 10, DK-8700 Horsens
Service
Sheet deburring and grinding
Price on request
Surface grinding and edge finishing after sheet cutting.
Service area
Production in Skive, Denmark
By Rustek A/S
Bjørnevej 3, 7800 Skive, Denmark
Service
Sheet grinding and deburring
Price on request
Edge rounding of laser-cut and punched components.
Service area
Supply coordinated through Hvidovre; production route depends on the operation
By AKS Industries A/S
Stamholmen 71–73, 2650 Hvidovre, Denmark
Service
Shot and grit blasting
Price on request
Abrasive preparation to remove rust and scale.
By Scanlak A/S
Ørnevej 10, Balling, 7860 Spøttrup, Denmark
Service
Shot blasting
Price on request
Chamber, drum and through-feed cleaning options for metal components; process suitability depends on wall thickness and geometry. Offered through the PlusCoat network.
By PlusCoat DK A/S
Værkmestervej 7, 5600 Faaborg, Denmark
Service
Shot blasting
Price on request
Mechanical removal of rust, paint and mill scale before coating.
By P. Schmidt Ringsted A/S
Huginsvej 11, 4100 Ringsted, Denmark
Service
Shot blasting
Price on request
Mechanical cleaning with an eight-wheel machine; opening 1.2 m wide and 3 m high.
By Protectors A/S
Dalager 6, 2605 Brøndby, Denmark
Service
Shot blasting
Price on request
Mechanical cleaning before subsequent finishing.
By 3N Lakering A/S
Industrivej 49, 7700 Thisted, Denmark
Service
Shot blasting
Price on request
Steel shot cleaning to Sa 2.5. Width depends on line: source gives conflicting 2500/3000 mm limits; thin-material exceptions apply.
Service area
Denmark; processing route depends on the relevant Tibnor network unit
By Tibnor A/S
Klokkestøbervej 18, 2., 5230 Odense M, Denmark
Service
Shot blasting and priming
Price on request
Steel shot blasting and optional priming.
By Lemvigh-Müller A/S
Stationsalléen 40, 2730 Herlev, Denmark
Service
Silver electroplating
Price on request
Conductive silver coatings for electrical parts, with optional passivation to delay tarnishing. Aluminium requires an electroless nickel undercoat.
By Chem-Tec Plating A/S
Kærvejen 13, 7171 Uldum, Denmark
Service
Spray pickling
Price on request
Airless spray application for parts unsuitable for immersion or too large for the tank.
By Industribejdsning, Nord ApS
Assensvej 4, 9220 Aalborg Ø, Denmark
Service
Spring shot peening
Price on request
Shot peening using steel or stainless shot.
By Lambæks Fjederfabrik A/S
Thrigesvej 3, 8600 Silkeborg, Denmark
Service
Stainless glass-bead blasting and electropickling
Price on request
In-house stainless cleaning and surface treatment.
By Staermose Industry A/S
Aahavevej 13, 8300 Odder, DK

Tradebird

How can I help?

Surface & heat treatment

Services from suppliers

Robotic grit blasting

Rubber coating and vulcanization

Sandblasting and metallizing

Sandstrom dry-film coating

Satin chromium plating

Satin nickel plating

Selective masking

Selective masking

Selective reel-to-reel plating

Sheet and profile deburring

Sheet deburring and belt finishing

Sheet deburring and grinding

Sheet grinding and deburring

Shot and grit blasting

Shot blasting

Shot blasting

Shot blasting

Shot blasting

Shot blasting

Shot blasting and priming

Silver electroplating

Spray pickling

Spring shot peening

Stainless glass-bead blasting and electropickling

Suppliers

3N Lakering A/S

AB Aluminium A/S

ABJ Metal A/S