Technical details

Business origins

Business origin 1941 as Østjydsk Elektro; engineering/machine-building transition in 1979; former A/S closed in 2009 and the business continued as today’s separate ApS.

Type 2280 semi-automatic sequence

Vacuum holds the blank; a rising die folds sides; the operator doubles the end folds

Type 1445 ST3 case format

Up to 600 × 800 mm (W × L); tape closure for half-pallet cases

Type 1445 ST2 case format

Up to 600 × 400 mm (L × W); magazine-fed pre-glued blanks with taped bases

Type 2065 operation

15–18 cases/min in the machine example; hotmelt-glued bases and transfer to filling; raised-frame configuration

Type 1770 display cases

Formed and glued cases with reinforced internal corners; product-dependent heights

Type 2530 configuration-dependent rate

15 trays/min with case insert or 35 display trays/min without insert

Type 2650 liner insertion

Case base up to 600 × 400 mm (L × W); variable bag length from roll film; automatic erection/insertion/filling/closing line integration

Type 2660 closing options

Case base up to 600 × 400 mm (L × W); bag-top folding or welding and case tape or hotmelt closure

Type 3600X zipper application

50 applications/min in the Miehle VFFS example; zipper welded to flat film before the forming collar/tube

Type 2630 profile packing

Magazine-fed cardboard erection, loading of varying-length profiles/accessories, closing and elastic-band binding

Type 1230 pastry forming

250 pastries/min in the spandauer example; movable unit locks over a dough-sheeting line and can be removed for other production

Type 2580 bread repacking

Bagged bread transferred from plastic crates to corrugated wrap-around cases for freezing/export; robot crate feed, case removal and palletising

Type 1990 foil-tray dispensing

Automatic infeed of tray stacks; two aluminium foil trays dispensed per cycle in the filling-line example

Type 2030 carton packing

30–40 erected and filled cartons/min in the dishwasher-tablet example; exchangeable format tooling

Type 2320 assembly requirement

Three SCARA robots join three components with two-component adhesive; customer requirement under ±15 µm gap tolerance at 12 units/min

Type 1620 intended environment

Gas-cylinder shrink-cap sealing described for Ex Zone 1; exact explosion-protection marking and conformity conditions remain unspecified

Type 1879 handling

Carton/case gripping, outer-case packing with separator sheets and palletising

Type 1852 sack handling

Small plastic-sack palletising in a high-friction/wear application; suction cups for separator board

Four-head servo gripper sequence

Four gripper heads and five servomotors; four motors position heads; cores tilted approximately 45°, dipped in release fluid in pairs and rotated under guarding

Type 1840 lid-packing cell

Type 1445 ST2 tape erector; corrugated/reused cases; robot lid loading, case closure, labelling and palletising