Internal and external electropolishing of components.
Electropolishing tank A: length × width × depth
2900 × 950 × 1170 mm, length × width × depth of the production tank; usable workpiece envelope depends on fixtures and treatment requirements
Electropolishing tank B: length × width × depth
1750 × 1250 × 1270 mm, length × width × depth of the production tank; usable workpiece envelope depends on fixtures and treatment requirements
Electropolishing grade suitability
Very good: AISI 304, 304L, 316 and 316L. Good: AISI 302 and 317. AISI 303 requires special treatment and grade identification on the delivery note. AISI 321 and 316Ti are unsuitable in this process guide; AISI 410, 420, 430 and 431 become grey and mottled. Linked legacy suitability table; trial treatment establishes the component finish.
Falkevej 27a, 3400 Hillerød, DenmarkUnicoat ApS treats stainless-steel surfaces in Hillerød, with a particular focus on internal electropolishing of small components. Its services include electropolishing, pickling, passivation, decontamination, local Clinox treatment, glass-bead blasting and TIG welding of small machine components. Mechanical finishing and before/after roughness measurement support treatment requirements.
The company offers trial treatments, careful packing and direct shipment to end users. It dates its business origins to 1974. The shared domain separately identifies Unicoat Pharma ApS and Unicoat Recover ApS; their dedicated pharmaceutical and mobile derouging capabilities belong to those separately identified businesses.
Internal and external electropolishing of stainless-steel parts, including removal of fine burrs in small holes. Trial treatments establish the finish for the component.
Service details
Electropolishing tank A: length × width × depth
2900 × 950 × 1170 mm, length × width × depth of the production tank; usable workpiece envelope depends on fixtures and treatment requirements
Electropolishing tank B: length × width × depth
1750 × 1250 × 1270 mm, length × width × depth of the production tank; usable workpiece envelope depends on fixtures and treatment requirements
Electropolishing grade suitability
Very good: AISI 304, 304L, 316 and 316L. Good: AISI 302 and 317. AISI 303 requires special treatment and grade identification on the delivery note. AISI 321 and 316Ti are unsuitable in this process guide; AISI 410, 420, 430 and 431 become grey and mottled. Linked legacy suitability table; trial treatment establishes the component finish.
