Technical details

Light-curtain minimum resolution

14 mm for the stated light-curtain range

Separate-actuator safety switches range and configuration

AZ 215/216 use EN 50047 mounting; AZ 315/316 use EN 50041 mounting. AZ 15 has a 52 × 75 × 30 mm plastic housing; AZ 16 is 52 × 90 × 30 mm. AZ 16ZI and AZ 17ZI use high coding under ISO 14119. AZ201 uses RFID and self-monitoring, with series chains up to 200 m and actuator offset of ±5 mm vertically and ±3 mm horizontally. AZ 415 has an adjustable ball catch up to 400 N. AZ 3350 measures 40.5 × 114 × 38 mm and AZ 355 measures 66.7 × 114 × 38 mm. SCG, SDG, SHG and TZG complete the range.

Guard-locking switches range and configuration

AZM40 measures 119.5 × 40 × 20 mm, with 2,000 N locking force, 40 N detent force and 180° actuation. AZM150 supports eight actuation planes and 40 mm profiles. AZM201 offers IP66/IP67 and series chains up to 200 m. AZM300 uses RFID and three actuation directions with IP69 protection. AZM400 uses a bistable motor lock rated 10,000 N and can unlock against a cross force up to 300 N; its stated PL e/Category 4 and SIL 3 apply to specified component functions. MZM 100 measures 40 × 179 × 40 mm. AZM161, AZM170, AZM190, AZM415, TKM/TKF and TZM/TZF provide further configurations.

Safety position switches range and configuration

PS116, PS215, PS216, PS226, PS315 and PS316 provide IP66/IP67 protection and actuator adjustment in 45° steps. PS215 and PS315 have metal housings; the other listed PS versions use plastic. Other series include 235, 236, 255, 256, 332, 335, 336 and 355. Positive-opening NC contacts follow IEC 60947-5-1. Achievable machine PL depends on switch arrangement and the evaluation circuit.

Hinged-guard safety switches range and configuration

Hinge-operated and flap safety switches monitor movable guards. T.C 235/236 suit service flaps and small doors, TV.S models suit heavy doors, and TESK/TESZ provide hinge monitoring with an adjustable switching angle on TESK.

Non-contact safety sensors range and configuration

Electronic CSS coded sensors and RSS RFID sensors sit alongside magnetic BNS safety sensors. RSS36 and RSS260 are further examples on the Danish product page. Range selection includes hygienic food applications and dusty environments; approvals and suitability remain model-specific.

Rope-pull emergency stops range and configuration

ZQ 700 supports a rope length up to 10 m, ZQ 900/901 up to 75 m on one side, RS655/RS656 up to 2 × 100 m, and T3Z 068 up to 2 × 50 m. RS655 uses metal and RS656 plastic with IP66/IP67 protection. Rope break or slack triggers the safety function; restart requires manual reset. Machine PL depends on the evaluation circuit.

Emergency-stop pushbuttons range and configuration

Emergency-stop actuators, contact elements and EFR spring elements support ISO 13850 emergency-stop functions. E/R programmes address harsh environments, N addresses food machinery and A provides industrial controls. Component selection does not establish the safety level of a complete machine.

Machine control panels range and configuration

BDF20/BDF40 offer interchangeable colour covers and M12 connections. BDF100/BDF200 use slim plastic housings; BDF200 has four control positions. BDF200-SD/FB provides an eight-pin M12 connection and OSSD signal functions.

Single-beam safety light barriers range and configuration

SLB 240 covers distances up to 15 m at PL c. SLB 440 has standard 15 m versions and H versions reaching 75 m, with 90 m functional reserve stated for the long-range configuration. Optional heating supports use down to −30°C. Four sensor-pair codings help avoid mutual interference.

Safety light curtains and grids range and configuration

SLC safety light curtains provide 14 mm or 30 mm resolution. IP67 and IP69K versions, blanking, muting and Bluetooth/SLC Assist diagnostics depend on model. The range also includes SLG grids and Ex light curtains and grids.

Safety laser scanners range and configuration

UAM scanners support two parallel protective zones, or one protective zone with two warning zones, and up to 32 zone sets. Encoder inputs support mobile applications; Ethernet, master/slave connections and muting depend on configuration.

Two-hand control panels range and configuration

SEPK uses a plastic housing and 55 mm buttons; SEPG uses cast alloy and can accommodate eight additional controls in 22.3 mm holes. SEP 09.0 uses aluminium, while SEPLC provides another housing arrangement. Two-hand monitoring modules support the panel function.

Enabling switches range and configuration

ZSD enabling switches support controlled setup and adjustment. ZSD 5 and ZSD 6 use plastic housings with two or three NO contacts respectively; these are enabling devices for the safety design, not general-purpose bypass controls.

Safety mats, edges and bumpers range and configuration

SMS 4/5 safety mats include custom sizes. SE 40/70 safety edges combine rubber profiles with aluminium rails. SSG-SBL bumpers provide tactile protection for moving equipment.

Safety foot switches range and configuration

TFH 232 and T2FH 232 provide single- and double-pedal safety switching with configuration-specific contact arrangements. IP65 protection and a −25°C to +60°C temperature range apply to the described safety foot-switch range.

AS-Interface Safety at Work range and configuration

Safety switches and system accessories connect through AS-Interface Safety at Work. ASIMON supports configuration of the safety system; software availability is not a separately established consultancy engagement.

Trapped-key interlocking range and configuration

SVE combines key selection and unlocking devices in an IP65 housing; SVM1 provides key distribution. SHGV/ESS21 key-operated selectors and SHGV guard locks coordinate access. Applications must account for machine run-down time relative to key transfer.

Safety relay modules range and configuration

The catalogue separates multifunctional and standard stop-category 0 and stop-category 1 relays, combined dual evaluation, two-hand control, muting and ATEX applications. SRB100DR supports double reset and SRB EXi supports intrinsically safe inputs. PL e/SIL 3 claims depend on the selected module and circuit.

Safety input expansion range and configuration

SRB-E-204ST/PE accepts active OSSD and contact inputs. PDM distribution modules and PFB field boxes provide passive connection options with serial diagnostics or parallel I/O. The catalogue still displays older PROTECT input expanders but explicitly limits their availability to the end of 2024; these are retained as historical range evidence only.

Safety output expansion range and configuration

SRB402EM and SRB-E-402EM provide four safe outputs and two signalling outputs. SRB-E-602EM provides six safe outputs or two groups of three, plus two signalling outputs, for stop-category 0 arrangements.

Standstill monitors and safety timers range and configuration

AZR31S1 monitors three-phase motor standstill without an external sensor by using induced voltage/frequency; FWS uses external pulses. Multifunctional and standard timer arrangements are listed. The AZS timer range is 0.1 seconds to 99 minutes; attainable safety performance depends on wiring and evaluation.

Safety controllers range and configuration

PROTECT PSC1 scales to 272 safe I/O and supports safe motion monitoring, serial diagnostics and industrial Ethernet options. PROTECT SELECT provides 18 safe inputs, four semiconductor outputs, two relay outputs and four auxiliary outputs, with four base programmes for configurations of up to six two-channel safety devices.

Industrial 3D cameras range and configuration

AM-T100 time-of-flight cameras support GenICam integration for production, logistics and robotics, with model accessories and configuration software.

Operator controls and enclosures range and configuration

H and N programmes use 22.3 mm mounting and IP67/IP69K protection; H includes blue hygienic seals. R/E use 22.3 mm mounting and IP65, E.V uses 30.5 mm mounting, Z uses 16.2 mm mounting and a 25 × 25 mm module, and A uses 22.3 mm mounting and IP65. DHS handles support AZM40 or RSS260. Stainless NBGLC/NBG housings offer IP69K; MBGAC alloy housings IP65, MBK plastic IP67 and KG plastic IP65. Cross switches, joysticks and contact/light elements complete the range.

Industrial foot switches range and configuration

F 232 and 2F 232 use single- and double-pedal alloy housings. LKF uses plastic; NKF1/2/3 provide low-profile pedal arrangements with a 2 m cable. Safety foot switches are also linked from this catalogue branch.

Inductive proximity switches range and configuration

IFL Efficiency Line and threaded cylindrical, smooth cylindrical and rectangular housing forms provide inductive position sensing. The same range is linked from the lift catalogue.

Industrial position and limit switches range and configuration

Light-, medium- and heavy-duty position switches include EN 50041/EN 50047 mounting arrangements. Selected versions cover −40°C to +80°C; this is not a blanket range rating. Positive-opening NC contacts follow IEC 60947-5-1, while AS-Interface and Ex versions are model-specific.

Reed switches range and configuration

SSB-R provides four tracks with two optional positioning tracks. BN families include 12, 20, 31/310, 32, 65, 75, 80, 85, 85-5, 120, 325 and 650. Switching distances depend on magnet and version: BN20 up to 50 mm, BN32 up to 55 mm and BN85 up to 40 mm. BN75 provides float-switch arrangements and BN85-5 has five contacts with LEDs.

Pull-wire switches range and configuration

TQ700 supports wire lengths up to 10 m, TQ900 up to 50 m and TQ441 up to 25 m. TQ215/TQ315 follow EN 50047/EN 50041 mounting formats; PS216 includes LED variants.

Rotary shaft limit switches range and configuration

MSP452 uses a 118 × 174 × 64 mm housing and four contacts for rotary shaft limit monitoring.

Slack-wire switches range and configuration

Type 441 slack-wire switches use a 106 × 181 × 63 mm arrangement with two contacts to monitor tension loss.

Belt-misalignment switches range and configuration

Z335/355 versions use a 22 mm nylon roller with a 95 mm tread and switch at 24° for belt speeds up to 1 m/s. Series 250 provides IP67 protection; 454 uses cast iron with stainless exterior parts. HDS provides lever adjustment in 10° steps and IP66/IP67 protection.

Geared limit switches range and configuration

G50 covers ratios up to 1:50 and G150 covers ratios above 1:50 for mechanically geared position limiting.

Microswitches range and configuration

M302/303 and multiple M/Z series provide compact switching arrangements. M630 includes heat-resistant versions up to 120°C; this temperature is specific to that version. Housing, contacts and actuation differ by series.

Photoelectric proximity switches range and configuration

IFOD photoelectric proximity switches include M30 housing arrangements for optical object detection.

Ex separate-actuator safety switches range and configuration

EX-AZ16 uses a 52 × 90 × 30 mm plastic housing and EX-AZ3350 a 40.5 × 114 × 38 mm metal housing, for the listed zone 22 applications.

Ex guard locks range and configuration

EX-AZM170 and EX-AZM300 cover zones 2/22. EX-AZM161 covers zone 22 with 2,000 N locking force and a 130 × 114 × 30 mm housing. EX-AZM415 covers zone 22 with 3,500 N locking force, a 130 × 100 × 46.5 mm housing and a ball catch up to 400 N.

Ex reed switches range and configuration

EX-BN20 is listed for zones 2/22, with a 104 × 52 × 47 mm alloy housing and switching distances up to 50 mm depending on magnet and version.

Ex safety sensors range and configuration

EX-RSS16 RFID sensors cover zones 2/22. EX-CSS180 uses an M18 housing, two PNP outputs and series chains up to 200 m with 16 sensors. EX-BNS120/180/303/33/250 and stainless EX-BNS40S provide magnetic alternatives; the stated food suitability of BNS180/BNS303 requires the specified stainless actuators.

Ex light curtains and grids range and configuration

Ex light curtains cover zones 1/21 with 14 mm or 30 mm resolution. Ex light grids cover zones 1/21 with a range up to 20 m.

Ex trapped-key interlocking range and configuration

EX-SHGV metal guard locks cover zones 1/21; EX-SHGV/ESS selectors cover zones 2/22. EX-SVE uses an IP65 plastic housing. Ratings belong to the specified component and configuration.

Ex safety position switches range and configuration

EX-335 and EX-355 metal safety position switches cover zones 2/22; EX-T335 covers zones 1/21. EX-355 measures 66.7 × 76 × 38 mm.

Ex rope-pull emergency stops range and configuration

EX-ZQ900 covers zone 22 with a single rope length up to 75 m. EX-RS655 covers zones 1/21 with up to 2 × 100 m of rope and IP66/IP67 protection.

Intrinsically safe monitoring modules range and configuration

SRB101EXI and SRB200EXI provide one- and two-contact input arrangements. The monitoring module can be installed in a cabinet in zone 2 while connected sensors may occupy zones 1, 2, 21 or 22, subject to the specified system configuration.

Ex hinged-guard switches range and configuration

EX-TV.S335 is a zone 22 metal hinge switch with a 360° shaft and a head adjustable in four 90° positions; its housing measures 40.5 × 107 × 65.3 mm.

Ex operator controls range and configuration

EX-R controls use 22.3 mm mounting and cover zones 1/21. Contact/light elements and V4A stainless mounting housings support the programme.

Ex belt-misalignment switches range and configuration

EX-441 covers zones 21/22. EX-BS655 covers zones 1/21 with IP66/IP67 protection and lever adjustment in 10° steps.

Ex slack-wire switches range and configuration

EX-441 slack-wire switches cover the specified zone 21 application.

Ex industrial position switches range and configuration

Light- and heavy-duty Ex position switches include heavy-duty configurations for zones 1/21 with IP66/IP67 protection and modular lever adjustment in 10° steps.

Lift control systems range and configuration

bp408 provides 16 programmable I/O split 8/8 and CANopen Lift, USB/Ethernet, RS485 DCP and RS232 interfaces; its type approval concerns EN 81-20/50 lift control functions. bp308 supports groups of up to eight lifts. WinMOS 300 and CANwizard support monitoring and diagnostics.

Lift monitoring equipment range and configuration

EYELEVATE monitors lifts and escalators independently of the lift controller, using NB-IoT connectivity, a SIM and VPN connection to a cloud service hosted in Germany.

Lift door locks range and configuration

AV15 metal and AV20 plastic locks serve single swing doors on passenger lifts. AV18 metal and AV21 plastic versions serve goods lifts without the same false-closure protection and are not passenger-lift substitutes. AV25 serves double passenger-lift doors and AV28 double goods-lift doors.

Positive-opening lift door contacts range and configuration

AZ05/06/07/08/09/13/14 and AZ15 provide lift door contact arrangements. AZ09 measures 30 × 38 × 15.5 mm; other ratings and actuation arrangements are model-specific.

Lift reed switches range and configuration

The lift catalogue links the same BN/SSB-R reed-switch range as industrial automation. Switching distances depend on the selected magnet and model, including BN20 up to 50 mm, BN32 up to 55 mm and BN85 up to 40 mm.

Lift safety position switches range and configuration

ZSM241, ZSM476E and 232 provide safety position switching for lifts. ZSM476E supports remote electrical reset.

Lift pull-wire switches range and configuration

PS216-T11-Q200 and PS216-T11-Q210 are listed lift pull-wire switch configurations, retained as range examples rather than separate inventory records.

Lift emergency-call systems range and configuration

EasyGate provides a fixed-line alternative with power-failure support; Lift IP, Lift 1 and Lift 8 provide other emergency-call configurations and accessories.

Lift inspection boxes range and configuration

TOCI inspection boxes can be configured with buttons and lamps and supplied prewired with plugs or terminals.

Lift inductive switches range and configuration

The lift catalogue links the same IFL inductive sensing range as industrial automation, including Efficiency Line and threaded, smooth cylindrical and rectangular housing forms.