MIG/MAG and multiprocess welding
Portable, automotive and production welding systems.
- Compact and separate-feeder layouts support different production setups.
- Sigma Core separate-feeder interconnections span 1.5–30 m; torch lengths span 3–6 m.
Arc-welding equipment, process software and technical support
Private to you. Nothing is shared with Migatronic A/S automatically.
Portable, automotive and production welding systems.
DC and AC/DC equipment for workshop and field use.
Robot-ready power sources and CoWelder packages; bespoke integration remains separate.
View source
Evaluate features and perform trial welds.
Preventive checks through Migatronic and authorised partners.
Fault repair and machine technical support.
Set up machines for a production line.
Check welding-instrument accuracy.
Practical instruction in equipment and welding setup.
Add compatible programs and functions.
Assess intended-use suitability and equipment safety.
Review equipment, processes and settings with welding specialists.
Alfa Laval
The Aalborg boiler-service team replaced heavier equipment with 17 kg Omega Yard 300 machines, easing transport and handling for service work.
B&E Stål
A Sigma Select trial ran for 33 arc hours over three weeks using solid and flux-cored wires on steel up to 20 mm thick.
AB Furhoffs Rostfria
CoWelder TIG with cold-wire feeding supported heating and sanitation components across varied production series.
J. E. Juncker
Seven Omega and Sigma machines were purchased during workshop modernisation following the 2015 ownership change, alongside a Sigma Select field trial.
Inno-Tec
Migatronic Nederland and dealer VLH Lastechniek provided advice, demonstrations, installation and configuration for two Sigma Galaxy machines.
HMK Bilcon
Fourteen Sigma Galaxy and twelve Pi 350 AC/DC machines supported aluminium tank production, including two-operator welding and 10 m push-pull hoses.
Frontmatec
Five Sigma Select machines with DUO Plus supported a shift from TIG to MIG/MAG on selected non-food-contact components. Food-contact components retained TIG.
L&S Technischer Handel
A CoWelder introduced after demand growth in 2016 handled 50–800-part batches of container spare parts. The customer described lead-time reductions from two weeks to one for some components.
NAP Sportauspuff Manufaktur
Pi TIG and Sigma Galaxy supported stainless exhaust production with dealer MeierSchultz advice. A TIG-A-Tack type-plate method was under development in the account.
Nordic Steel
Sigma Select equipment was purchased through Rogaland Import Service for varied fabrication work.
Samson Agro
Migatronic and Migatronic Automation jointly developed a wall- or ceiling-mounted CoWelder with Sigma Select 400 for agricultural-equipment production.
Weissenborn
Migatronic supplied guidance around two Sigma Select machines. With customer approval, particular stainless components changed from TIG to MAG; reported welding time fell by up to 22% on those components.
Vilsen Biler
A one-month Automig 300 Pulse trial evaluated vehicle sheet-metal welding and brazing in the repair shop.
Smed T. Kristiansen
A UR10-based CoWelder with Sigma Select 400 was supplied through PM Services, with operator training at Fjerritslev.
Ole Almeborg
Migatronic configured pulse power sources for stainless components. Migatronic Automation supplied turntables and separate cell and retrofit work in the collaboration described in 2017.
FM Bulk Handling – Fjordvejs
PowerArc Pulse was implemented on 12 Sigma Select machines with training and follow-up advice. The customer reports up to 25% faster pulse welding and less post-treatment on stainless handling equipment.
KML Miller
Migatronic equipment supported fine-grained steel and aluminium cabin production, including pulse welding and access to welding-procedure specifications.
Global Boiler Repair
The historical marine-boiler repair fleet included around 100 machines, among them 35 Pi 350 units, Omega Yard, Sigma Select and plasma cutters, supported through the international service network.
Brimas
Dealer 3K supplied five Sigma Select machines. Migatronic specialists trained operators, advised on DUO Plus and supported Super Duplex welding setup.
AIZ gGmbH
One TIG and two MIG/MAG CoWelders were introduced for production and operator training.
Svend Frederiksen Maskinfabrik
A CoWelder was introduced for varying components and batch sizes, with apprentices among its users.
Kuhz Metallbau
Migatronic provided startup and training after dealer SUT Rostock introduced a CoWelder for trailer parts and lifting eyes.
Kvaerner Stord
An Omega Yard field trial ran for 55 minutes near 300 A before the wire ran out. This was an application trial, not a formal duty-cycle rating.
Migatronic and NG Metal donated welding machines and supported teaching drawings and ventilation at Lviv High Professional-Polytechnic College.
Kecon
Production manager Eskil Valaker describes ongoing access to knowledgeable Migatronic service technicians and thorough completion of booked equipment-support work.
ISO 9001:2015
DNV certificate 202266-2016-AQ-DEN-DANAK covers development, production, sale and service of welding machines, plasma cutters and torches, plus sale of accessories and consumables, at Aggersundvej 33, Fjerritslev. Issued 29 October 2025; valid 1 November 2025–31 October 2028.
ISO 14001:2015
The environmental management system is certified to ISO 14001:2015. The quality policy identifies certification in January 2024, reaffirmed in the 2025 CSR statement.
ISO 45001:2018
The occupational health and safety management system is certified to ISO 45001:2018. The quality policy identifies certification in January 2024, reaffirmed in the 2025 CSR statement.
Oglaend System
Manual welding-equipment customer; the separate custom automation engagement was delivered by Migatronic Automation.
Arc-welding machines, plasma cutters and torches are developed and manufactured in Fjerritslev. The range covers portable maintenance and automotive equipment, configurable MIG/MAG and TIG production systems, and power sources for robotic welding. Torches, consumables, extraction, protective equipment and workshop accessories complement the machines. Demonstrations, process advice, training, commissioning and equipment support are available through Migatronic and its authorised network. CoWelder packages combine the welding equipment with collaborative robots; bespoke automation is delivered with the separate Migatronic Automation integration business.
Gas pressure regulators
Claim this profile to review and manage its public information.
Tradebird created this profile from public sources. Migatronic A/S has not reviewed or endorsed it.
Updated Sep 13, 2026