Decorative prepainted metal
Custom-colour coated steel, stainless steel and aluminium, including a specifically approved marine polyester system.
View sourceDecorative and functional coil coating of steel and aluminium
Private to you. Nothing is shared with Metalcolour A/S automatically.
Custom-colour coated steel, stainless steel and aluminium, including a specifically approved marine polyester system.
View source
Binders, anti-friction systems and custom functional coatings for downstream industrial use.
View sourceCoating/process collaboration and cut-length supply within the documented substrate ranges.
View sourceApplication of system-specific coatings for sliding interfaces, gaskets and springs, with performance selected for the application.
Collaboration on coating selection and adapting production from piece-coated parts to precoated material, involving specialist co-producers when needed.
Own-developed or customer-specified primers and coatings for thermal, chemical, corrosion, sealing, UV or other functional requirements.
Cut-length supply for the substrate/thickness combinations marked available in the technical-coating sheet; not available for every coil combination.
Custom prepainting of steel, stainless steel and aluminium with agreed colour, gloss and smooth or textured finish.
Application of heat-activated binders to metal for subsequent rubber or plastics bonding. activation is 100–130 °C; binder selection depends on the downstream process.
ISO 9001:2015
DNV 16196-2004-AQ-DEN-DANAK, Metalcolour A/S, Agrovej 6, Nykøbing F. Scope: coil coating and processing of metals. Issued 17 February 2026; valid to 28 February 2029; initial certification 5 November 2004.
MED Module B: FIRESAFE POLYESTER
DNV MEDB000053M revision 1, issued 13 May 2024, expires 12 May 2029. Low-flame-spread decorative veneer,8 µm polyester/melamine primer plus 32 µm polyester topcoat on 0.4–1.25 mm steel/aluminium. Approved on metallic or noncombustible base; other adhesives require testing/approval. Product-specific IMO2010FTP scope, not all painted metal.
MED Module E: FIRESAFE POLYESTER quality system
DNV MEDE000001T revision 1, Metalcolour A/S production at Agrovej 6, Ø Toreby, Nykøbing F. Issued 13 May 2024, expires 12 May 2029, subject to annual audits. Annex links FIRESAFE POLYESTER to MEDB000053M revision 1 and USCG164.112/EC0575/MEDB000053M revision 1.
DAMPA: sister-company material supply
A 29 August 2023 Danish factory article says most of its decorative prepainted metal was supplied to sister company DAMPA for ceilings and acoustic solutions. This establishes an ongoing supplier relationship, without identifying a particular building or installation.
Metalcolour A/S coats metal at its Danish plant in Nykøbing Falster. It supplies prepainted steel, stainless steel and aluminium and applies technical coatings, primers and binders through a coil-to-coil production route. Decorative systems are tailored by colour, gloss and texture; functional systems are selected for the intended downstream process. Metal Binder prepares metal for rubber or plastics bonding, while anti-friction coatings serve applications such as gaskets, springs and sliding interfaces. The company also collaborates on coating development and adapting manufacturing to precoated raw material. Its Danish ISO 9001 certificate covers coil coating and metal processing. Specific FIRESAFE POLYESTER construction has MED approvals. DOBEL film lamination is identified separately on the group website as Swedish and Singapore production.
Claim this profile to review and manage its public information.
Tradebird created this profile from public sources. Metalcolour A/S has not reviewed or endorsed it.
Updated Sep 13, 2026