Industrial refrigeration, heat pumps and lifecycle support
Private to you. Nothing is shared with Johnson Controls Denmark ApS automatically.
Sabroe reciprocating compressor families for industrial refrigeration and heat-pump duty.
Small, large and high-pressure screw compressor units with variable capacity and control options.
View source
Ammonia chillers with reciprocating or screw compressors, plus cascade and outdoor configurations.
Sabroe packages recover heat for industrial processes and district heating.
Air-cooled chillers and air-to-water heat pumps provide model-specific scroll and screw solutions.
Compressor and plant controls, vibration monitoring and fixed-speed or variable-speed electrical panels support thermal-system operation.
Supplied Sabroe vessel and heat-exchanger range for refrigeration circuits.
Air purgers and water, dirt and oil purification systems for industrial refrigeration.
View source
Holme aftermarket programmes provide compressor exchange, factory overhaul and block retrofit alongside spare parts, upgrades and lubricants.
Nationwide service teams maintain, repair and upgrade refrigeration and heat-pump plants, with OpenBlue monitoring for connected equipment.
Seven instructor-led technical courses at Holme for service engineers and technicians.
Water-cooled chillers and water-to-water heat pumps span screw, scroll, magnetic-bearing and centrifugal platforms.
R718 absorption chillers and heat pumps use thermal energy for cooling or district and industrial heating.
The marine operation supplies and supports HVAC and refrigeration for merchant, offshore and fishing-vessel applications.
Danish teams design, integrate, install and commission industrial refrigeration and heat-pump plants.
Price on request
Three-day course covering chiller installation checks, sensors, commissioning, controls and maintenance.
Price on request
Replace the compressor block while retaining the existing unit.
Price on request
Exchange a worn compressor for a new or rebuilt unit.
Price on request
Workshop repair and overhaul of the customer’s compressor.
Price on request
Three-day course covering compressor-unit installation, commissioning, operation and maintenance.
Price on request
Three-day mechanical maintenance and overhaul course covering SGC, TDSH and XJF/RXF compressors.
Price on request
Three-day course covering HeatPAC, DualPAC and heat-pump installation, controls, safety and maintenance.
Price on request
Remote operational visibility and performance insight for connected refrigeration equipment.
Price on request
Scheduled inspection and maintenance for refrigeration, freezing and heat-pump systems.
Price on request
Three-day course covering reciprocating-compressor operation, maintenance and mechanical overhaul.
Price on request
Three-day course covering SAB128–202 operation, capacity and volume-ratio control, bearings, rotors and workshop overhaul.
Price on request
Two-day practical course on UniSAB controls and their use in refrigeration equipment.
Supply, installation and start-up of thermal-system packages.
Lifecycle support for marine HVAC and refrigeration installations.
Assessment and modernization of existing refrigeration and heat-pump installations.
Fault response and repairs for supported thermal equipment.
Design and integration of refrigeration and heat-pump installations.
Aalborg Fjernkøling A/S and Aalborg Varme A/S
Supplied cooling and heat recovery for New Aalborg University Hospital through Aalborg Fjernkøling and Aalborg Varme. The 13 August 2020 contract covered controls, electrical work and start-up; the installed system combines three ChillPAC chillers and two HeatPAC heat pumps with lake free cooling.
Frederiksberg Fjernvarme A/S
Designed, supplied, installed and commissioned four heat pumps totalling 6.5 MW at Frederiksberg waterworks. Commissioned in 2024, the plant extracts heat from drinking water for district heating, cooling the water to 4–7°C.
Kredsløb
Installed two parallel nominal 1 MW cascade heat-pump systems at Maskinrummet, Aarhus Ø. Each combines a seawater/steam lower cycle with an ammonia HeatPAC upper cycle; the installation was studied in the Danish Technological Institute’s 2024 digital-twin research project.
ISO 45001:2018
Bureau Veritas DK019845, version 1, issued 8 December 2025 and expiring 16 October 2028. Johnson Controls Denmark ApS, Christian X’s Vej 201, Højbjerg: development, design, production and sale of gas/refrigeration compressors, pressure vessels, heat exchangers, fittings and refrigeration units, plus sale of associated electrical controls and monitoring.
ISO 14001:2015
Bureau Veritas DK019846, version 1, issued 8 December 2025 and expiring 16 October 2028. Same named Højbjerg entity/site and listed compressor, refrigeration and pressure-equipment activities; the document also references Executive Order 761/2024. Subject to continuing certification conditions.
ISO 9001:2015
Bureau Veritas DK018229, version 1, issued 26 August 2024; cycle 27 August 2024 to 26 August 2027. Johnson Controls Denmark ApS at Højbjerg: development, design, production and sale of refrigeration systems, compressor units, chillers, heat pumps, vessels and heat exchangers, and sale of associated controls/monitoring. Annex also covers specified FMF Hungary sites; their manufacture is not attributed to Denmark.
PED module H1 quality-system approval
Bureau Veritas CE-0062-PED-H1-JCI-001-24-DNK rev B, dated 26 September 2025, expires 15 September 2027. Covers listed category IV pressure equipment/assemblies and the approved manufacturing scope, including an additional FMF Hungary site. Applies to the annexed scope, not all products or all factories.
PED module H quality-system approval
Bureau Veritas CE-0062-PED-H-JCI-001-24-DNK, dated 16 September 2024, expires 15 September 2027. Listed category I–III vessels, piping, heat exchangers and assemblies. Annex includes additional Hungary manufacture and French design activity; those activities are not moved into the Danish site scope.
DNV manufacturer approval: expired 30 June 2026
Historical AMT000005V revision 2, issued 19 February 2024 for Johnson Controls Denmark ApS, Sabroe Factory/Holme Plant, covering welded pressure vessels classes I and II and listed workshop scope. It expired 30 June 2026; no renewal was established. Certain heat treatment and pressed parts require approved external facilities. Not presented as a current certification.
Kalundborg Renseanlæg A/S
Awarded on 13 May 2025: inspection, preventive maintenance and service coordination for Kalundborg Renseanlæg’s existing 10 MW heat-pump plant, comprising three lines with four compressors each. The contract runs through 31 December 2028 with two optional extension years.
View sourceDronninglund Fjernvarme
Awarded on 7 December 2019: heat-pump machinery, electrical equipment and controls using ambient-air and seasonal pit-storage heat. PlanEnergi acted for the utility; building works and external power supply were excluded. Completion is not established.
View sourceFSTA membership
Membership of FSTA.
Johnson Controls Denmark designs, supplies and supports industrial refrigeration and heat-pump installations. Its Holme operation manufactures customised Sabroe heat pumps and chillers and carries out compressor aftermarket work. Danish teams provide installation, maintenance, repair, parts and technical training, with a marine operation supporting HVAC and refrigeration projects. Buyers can source both locally manufactured equipment and specified group product ranges; manufacturing origin and delivery scope depend on the selected equipment. The Holme expansion opened on 11 May 2026, adding 2,300 m² of production space and 1,800 m² for customer and testing facilities.
Claim this profile to review and manage its public information.
Tradebird created this profile from public sources. Johnson Controls Denmark ApS has not reviewed or endorsed it.
Updated Sep 13, 2026
