- Viking 2000: configuration
- Separators and feeding preparation for industrial ironer lines. Viking 2000: up to 2200 single sheets/hour depending on linen, pre-drying and setup
- Express Pro: configuration
- Cornerless feeding of sheets and table linen into finishing lines. Express Pro: four feeding stations and up to 2400 pieces/hour in two-lane operation in the current Express Pro configuration
- EXP: configuration
- EXP steam ironers use flexible chests and up to three rolls of 800, 1000 or 1200 mm diameter by configuration; the mono-roll EXP 2000 is also in the range.
- JENSEN Gamma: configuration
- Folding and stacking of napkins, pillowcases and other small flatwork. Gamma: up to 2000 items/hour and 50 formats in the February 2024 brochure
- Max: configuration
- Drop-stacking of folded linen and sorting into separate stacks. Max: up to 350 mm stack height in the Max brochure; integrated, free-standing and Twin configurations
- JENSEN Conveyor System: configuration
- Conveyor-based linen supply with automatic separation by shark wings and automatic call-off to feeder operators.
- Jenrail 2000 Automatic: configuration
- Automatic sorting and buffering of washed linen on rails, using Twin clamps and continuous supply to ironer lines.
- Turnus: configuration
- Flatwork and towel separator delivering 1500–3000 pieces/hour according to linen and configuration, with conveyor or trolley discharge and optional remote service.
- Trolley Tilting Device: configuration
- Trolley lift and tilt loading for moving washed linen from a centrifuge or standalone washer to a dryer.
- Basic Plus: configuration
- Vacuum-assisted small-piece feeder for 3–6 lanes; optional spreading clamps enable single-lane large-piece feeding.
- KliQ feeder: configuration
- KliQ feeding platform with small-piece operation in 3–6 lanes and large-piece operation in one, two or combined lanes; servo spreading and transfer beam.
- Variant 2000: configuration
- Variant table-linen feeding with vacuum-beam transfer and program-controlled spreading tension and vacuum; large/small pieces depend on configuration.
- Kalor G 1200: configuration
- Self-contained gas ironer with flexible chest, carbon-steel ironing surface and integrated modulating-burner heat source.
- JENSEN Flatwork Ironer - JFI: configuration
- JFI gas ironers for small and medium laundries, with 350 or 600 mm cylinders and 1650–3200 mm working widths depending on model; stainless cylinder and return-to-feed layout.
- EXPG: configuration
- EXPG self-contained gas ironers with flexible chest and carbon-steel contact surface; up to three rolls with 800 or 1200 mm diameter by configuration, including mono-roll EXPG 2000.
- EX: configuration
- EX steam ironers with fixed chest and carbon-steel contact surface; up to three rolls with 800, 1000 or 1200 mm diameter by configuration.
- Blanket: configuration
- Blanket folders using air-blast folding and sandwich belts; up to three lateral and three cross folds by configuration, with optional spreading clamps and stacker.
- Universal: configuration
- Universal folding platform for mixed flatwork, using reversing conveyors and knife cross folds; half, French and M folds and lane options depend on model.
- JENSEN Classic: configuration
- Classic folding and stacking platform for one- and two-lane operation; up to 60 m/min, three lateral and three cross folds, and up to six stackers according to width.
- Magic: configuration
- Magic primary folders for table and bed linen in 1–6 lanes, using reversing conveyors for half and French folds according to options.
- Silverline: configuration
- Silverline single-lane folder with knife/reversing-conveyor cross folding; up to 60 m/min and three lateral/cross folds; one or two integrated plus up to two external stackers.
- Olympic, Napkin & BottomUp: configuration
- Olympic combination of lateral folding, cross folding and stacking for small pieces and bib aprons; half/French fold patterns and coupled lanes depend on configuration.
- Napkin & BottomUp: configuration
- Napkin and BottomUp cross-folding and stacking platforms using knives and adjustable templates, with coupled-lane stacking and bypass options.
- MFS: configuration
- MFS small-piece cross folder and stacker for healthcare linen, using a knife between swing arms and lane-specific bypass.
- Drape & Store: configuration
- Drape & Store small-piece folding and stacking across bars, with a multiple-bar step conveyor and optional lane-specific bypass.
- Centro JL: configuration
- Centro JL small-piece knife cross-folding and stacking, with thickness adjustment and optional centering in each lane.
- Roll Off: configuration
- Roll Off large-piece stackers use a roll-off table and height-adjustable stacking table; multiple sorting stackers and Jenway discharge are possible.
- OT: configuration
- OT large-piece stackers turn linen onto a height-adjustable stacking table.
- Concorde TF: configuration
- Concorde TF standalone towel folding and stacking with pivoting lateral flaps, reversing-conveyor cross folds, half/French folds and bypass.
- Jenway: configuration
- Jenway transport and storage of linen stacks with automatic removal and strapping, batch Track & Trace and production-data exchange; galvanized-steel frames.
- Katana: folding and stacking
- Up to three lateral and three cross folds; four, five or six InLine stackers according to machine width.
