Technical details

Bins and silos: volume range

1 m³ dosing to 150–200 m³ storage; configuration and feedstock dependent

Screw conveyors: Screw diameters/incline

230/300/400/500/600 mm; up 30°; configuration and feedstock dependent

Eco lamella pumps: model envelope

1.5–250 t/h; particles up 135 mm; distance up 200 m; independent model limits; not a combined operating envelope; configuration and feedstock dependent

Offal and bone crushers: capacity/output

6–50 t/h; below 30 mm particles; configuration and feedstock dependent

Coil dryers: heating surface

40–475 m²; configuration and feedstock dependent

TST sludge disc dryers: Heating medium

6–10 bar steam or thermal oil; configuration and feedstock dependent

Continuous meal coolers: thermal duty

90–110°C inlet to below 50°C; condition-dependent; configuration and feedstock dependent

Stickwater evaporators: concentration duty

4–6% feed solids to about 30%; configuration and feedstock dependent

FSP3500 fat screw presses: cake throughput

2800–4500 kg/h; feed-dependent; configuration and feedstock dependent

Twin-screw presses: model range

2.5–60 t/h; 7.5–132 kW; configuration and feedstock dependent

Fat filtrators: screen

0.7–1 mm mesh; 450x700 mm; configuration and feedstock dependent

Tallow pumps: operating figures

Up to 100 °C, 18 m³/h, 25 mm particles and 2 bar; limits depend on configuration. Configuration and feedstock dependent.

Fish unloading pumps: throughput

Up to 270 m³/h across HM35/HM45 configurations. Configuration and feedstock dependent.

Carcass and bone pre-breakers: throughput and particle size

10–50 t/h; nominal particles larger than 30 mm before further crushing. Configuration and feedstock dependent.

Fine crushers: duty

Up to 18 t/h; approximately 13 mm output particles. Configuration and feedstock dependent.

Frozen-block crushers: throughput

7.5–50 t/h for bone-free frozen material. Configuration and feedstock dependent.

Hopper-fed grinders: model range

Grinding head diameters 250–550 mm; throughput 2,500–25,000 kg/h. Configuration and feedstock dependent.

Pump-fed grinders: throughput

2,000–25,000 kg/h. Configuration and feedstock dependent.

Roller crushers: throughput

Approximately 25 t/h. Configuration and feedstock dependent.

Wet mills: HWM441 configuration

150 kW drive and 92 hammers. Configuration and feedstock dependent.

Packaged-food crushers: throughput

Up to 20 t/h; 40 mm shaft gap. Configuration and feedstock dependent.

Blood coagulators: throughput

Up to 10,000 litres/hour. Configuration and feedstock dependent.

Horizontal feather hydrolysers: throughput

5–12 t/h. Configuration and feedstock dependent.

Spin-flash blood dryers: drying conditions

Drying air approximately 220 °C and residence time approximately one second; air temperature is not product temperature. Configuration and feedstock dependent.

ST and HM fat screw presses: model range

280–6,900 kg/h cake output and 22–200 kW installed power; model-specific. Configuration and feedstock dependent.

Feather presses: dewatering claim

Approximately 55% remaining moisture; up to 350 litres removed per 1,000 kg of wet feathers, depending on feed conditions. Configuration and feedstock dependent.

Hog-hair presses: model range

HP325/HP408: 1,000–2,000 kg/h and 5.5–7.5 kW. Configuration and feedstock dependent.

Rotative fat drainers: model range

TR05080/TR050130: 1–10 t/h. Configuration and feedstock dependent.

Food-waste depackers: throughput and separation geometry

10–15 t/h; 15 mm perforations and approximately 12 mm organic output particles. Configuration and feedstock dependent.

Shell-and-tube vapour condensers: tube diameter

38 mm. Configuration and feedstock dependent.

Compact coagulator heat recovery

Waste-heat preheating to approximately 60 °C before further coagulation.

FSP3500 press configuration

Cake fat content 9–14%; installed power 110–160 kW, depending on configuration and feed.

Continuous meal cooler duty

Up to 15 t/h meal and 31,000 m³/h cooling air; operating conditions depend on feed and configuration.

High-speed crusher shaft speed

Approximately 300 rpm.