Modular switchboard systems
Enclosure and insert systems for configurable low-voltage assemblies.
- 192 mm main module
- Main, distribution, marine and MCC applications
- Ratings and verification depend on the assembled design
Modular switchboard enclosures, copper connections and panel-builder support
Private to you. Nothing is shared with CUBIC-Modulsystem A/S automatically.
Enclosure and insert systems for configurable low-voltage assemblies.
Stainless and painted housings supplied for installation.
Copper busbars, measurement and protection components selected for switchboard integration.
Modular enclosures configured for power distribution, motor control, marine and data-centre systems.
CSE Solutions Private Limited
CSE Solutions designed and assembled a C-shaped MCC for an EPC customer in Bangladesh between February and June 2024, with CUBIC and Rockwell Automation India support. The 2,040 × 11,328 × 624 mm assembly combined fixed and withdrawable inserts, form 3b separation, copper busbars, 630 A at 380 V/50 Hz and a 50 kA/1 s short-circuit rating. These specifications belong to CSE’s project assembly.
Holland Marine Electric
Holland Marine Electric replaced labour-intensive copper connection preparation with ready-to-use Cu-flex. In its testimonial published in February 2023, the customer estimated a 75% time saving in conversation with wholesaler Solar.
EiG Integral Services
EiG Integral Services received theoretical and practical Modular System training, a factory visit and an introduction to Galaxy design software.
Elbogen Electric AB
Received hands-on training in mechanical assembly and an introduction to CUBIC Galaxy.
Ingemation Ingeniería
Attended training at CUBIC Denmark covering assembly and design of its systems.
Factor Potencia
Received CUBIC product training with physical demonstrations supporting understanding of the systems.
Modular System verification and testing
Independent DEKRA verification of selected assemblies to IEC/EN 61439-1, -2 and -3, together with UL, vibration and seismic testing. Verification applies to the tested assembly configurations.
ISO 9001
Quality management certification for CUBIC’s management system.
Cu-flex testing and UL recognition
Cu-flex connections have DEKRA and DNV/GL testing and UL recognition as panelboard and switchboard accessories.
ISO 14001
Environmental management certification for CUBIC’s management system.
ISO 45001
Occupational health and safety management certification stated in the current policy block. The page also retains a legacy block naming OHSAS 18001.
CUBIC-Modulsystem A/S supplies modular enclosure systems, standard and customised cabinets, copper connections and selected electrical components for low-voltage switchboards. Its Brønderslev contact serves a portfolio used by panel-building partners across industrial, marine, infrastructure and energy applications. The Modular System combines standard steel modules with component choices from different manufacturers. CUBIC also designs and manufactures customised enclosures and provides structured partner training. Finished switchboards in the retained international cases are assembled by named partners; their project delivery is distinguished from CUBIC’s system supply and technical support. The Modular System uses a 192 mm module and supports configurations up to 6,300 A and IP54. Cu-flex connections cover lengths of 160–1,120 mm and currents up to 1,040 A according to size. CPS25 supports up to 800 A and remains orderable with longer lead times after stockholding ended on 1 May 2024.
Junction boxes
Claim this profile to review and manage its public information.
Tradebird created this profile from public sources. CUBIC-Modulsystem A/S has not reviewed or endorsed it.
Updated Sep 13, 2026